BREWHOUSE

SDET has been a leading brewery manufacturer for over ten years. We specialize in building brewhouses 1HL 2HL 3HL 5HL 10HL 20HL 30HL 50HL 100HL. Our brewhouses can be customized with two to five vessels with electric,  steam, or direct fire configurations to meet your specific needs. Browse our standardized systems below or contact one of our brewery design consultants about your customized needs.

TWO VESSEL BREWHOUSE

2 Vessel Configuration:

  • Mash/Lauter tun, kettle/whirlpool, HLT/CLT as options

All Features Include:

  • Both vessels are able to heat, which gives a wide range of opportunities for the implementation of creative ideas of brewers.
  • The brewhouse with small dimensions and a well-thought-out piping system makes the workflow simple and convenient.
  • With this brewhouse, you can produce the beverages with high density and products.
  • The brewhouse allows you to make two batches of brewing every day, which significantly affects the overall brewery performance.
  • Two vessels & pipelines can be placed on an integral platform, which is beautiful and saves your time in on-site assembly.

Size:

  • 1-30HL,  available upon request

THREE VESSEL BREWHOUSE

3 Vessel Configuration:

  • Mash tun, Lauter tun, Kettle/whirlpool Or other combinations based on your brewing process, HLT/CLT as options

All Features Include:

  • Mash tun and Kettle can be powered by electric, steam, or direct fire.
  • This configuration allows you to make four batches of brewing every day, which significantly affects the overall brewery performance.
  • Wort balance column, wort test station, auto water mixing station, and spent grains automatic discharge system as options.
  • Manual butterfly valves and pneumatic butterfly valves are available to choose from.
  • Semi-automatic and fully automatic for your choice.

Size:

  • 10-60HL

FOUR VESSEL BREWHOUSE

4 Vessel Configuration:

  • Mash tun, Lauter tun, Kettle, Whirlpool, with HLT/CLT options

All Features Include:

  • This configuration allows you to make six batches of brewing every day, which significantly affects the overall brewery performance.
  • The mash tun is equipped with a mixer mounted on the bottom, stir evenly and avoid dry pot and agglomeration.
  • Lauter tun is equipped with a wort balance column & flushing head to prevent wort from clogging the sieve plate and achieve smooth filtration.
  • The kettle is equipped with an internal heater, which makes the wort boiling evenly with a low evaporation rate.
  • Whirlpool adopts an inverted cone angle design, which has a good vortex settling effect, relatively complete separation of thermal coagulation, and short settling and clarification time.
  • Semi-automatic and full automatic for your choose

Size:

  • 10-100HL

Looking for Something Else?